Heat treatments are popular in industrial part manufacturing, often used to improve the material's specific physical and chemical composition. The process involves heating metal alloys to extreme temperatures and the immediate cooling of the heated metals under monitored conditions. This rapid heating and cooling drive the changes in the chemical composition and atomic structures of the metal alloys.
Heat treatments can deliver physical properties like improved hardness, strength, malleability, and processability. Heat treatments are also widely suitable for most materials that are used with CNC machining. This article describes the factors necessary for heat treatment and the many benefits of the process for CNC machined parts.
What factors are essential in heat treatments?
The effectiveness of heat treatment operations grossly lies within process control. Three factors are essential if a heat treatment process is to achieve the desired results. They include:
The temperature to which the material is heated must be sufficient to cause changes in its physical and chemical composition.
How long the metal alloy is maintained at the elevated temperature
iii. Cooling rate
The rate of cooling the metal alloy back to normal temperature has a crucial effect on the metal's final physical characteristics.
When can you heat-treat your parts?
Parts to be CNC machined may be heat-treated before or after machining operations. Here are some insights into the benefits of applying heat treatments before or after:
i. Before machining
Applying heat treatments before machining means that you will be working with standardized materials. This is often faster, but the increased hardness may make machinability more challenging.
ii. After machining
Heat treatment may be considered as a type of finishing solution. This helps to deliver the hardness and strength to the part after it has been produced. While this extends the overall leadtimes, the machinability of the material is more straightforward.
What are the types of heat treatment available for CNC machined parts?
There are numerous heat treatments for CNC machined parts. These treatments serve varying purposes. In this article, we shall cover 6 techniques and the purposes they serve. Here are 5 types of heat treatments available:
Annealing is a metal heat treatment technique that involves heating the metal to a high temperature and cooling the material to achieve the desired atomic structure. Annealing is done to improve the malleability and machinability of the metal alloy. It softens the part for further processing (if any) and may be done before or after the part has been made.
Quenching, like annealing, begins by heating the metal alloy to a very high temperature. The hot metal is then rapidly cooled by dipping the metal in water, oil, or super cool air. The rapid cooling process performs the function of making permanent changes to the structure of the material. The process usually follows after CNC machining. The primary aim of quenching is to achieve more hardness in the metal material.
Aging, also called precipitation hardening, is used to increase the strength and hardness of the material. The process begins with heating the material to a high temperature, then rapid cooling or quenching comes next. Lastly, the cooled material is reheated to a lower temperature for extended periods to complete the aging process.
iv. Case hardening
Case hardening is used when CNC machinists want to increase the material's hardness only at the surface level. The process keeps the underlining materials (core) in their brittle and soft state. It can be likened to how materials like aluminum can be anodized to increase the surface hardness and thickness of their oxide layer.
v. Stress relieving
As the name suggests, stress relief is used to eliminate the residual stress from the CNC machining process. It is used for parts that have a significant need for excellent mechanical properties. Stress relieving will involve heating the part to high temperatures, but not as high as annealing temperatures.
Tempering is a heat treatment operation that reduces the brittleness of the metal alloy following a quenching operation. It is widely applicable to mild steels and steel alloys and aids the material's mechanical performance. Tempering, like stress relieving, takes place at a temperature lower than annealing.
FirstPart CNC Machining in China
FirstPart is one of China’s leading manufacturing hub for Additive, CNC and Conventional manufacturing techniques. We boast of excellent in-house capacity, labor force and logistics while delivering exceptional value for money.
Casting, Aluminium Extrusion, Heat treatment, Post-machining/Finishing services and much more.
As we understand the global challenges that is faced by new and existing businesses in these times of the Coronavirus, we offer product tooling, mass production, bridge tooling and low-volume prototyping/manufacturing with very flexible minimum order quantities (1 to 100,000). Our services are online, scalable and innovative, with a team of engineers and design experts available to support you through your entire product development cycle.
Number of Country service
Experience in the industries