13

10

2019

How to properly finish and paint your 3D part

news

How to properly finish and paint your 3D Part 

When it comes to 3D part, there’s no doubting the quality and diversity we offer at FirstPart. But what exactly makes an excellent 3D part? Is it the material strength, the speed of the manufacturing or the beauty and aesthetic of the part when done? Well, the answer is all of the above. Today, you get to learn all the best finishing tips you can use to perfect, treat and beautify your 3D-printed part. Let’s get right into it. 

Finishing 
Finishing generally refers to all the last touches required to bring perfection to your part immediately after production. This may range from basic things like cleaning out dust or trimming rough edges. Here are some noteworthy tips to perform finishing touches on your 3D part: 

Clean off any residual glue from the printing process 
Rid your part of rough edges, blobs or material strings with wire cutters or tweezers 
Smoothen rough edges with appropriate sandpaper 
Use fillers to repair incomplete layers
Clean off dust with a web scrub brush or small moist towel cloth (depending on the size of your part)

Painting 
Now to painting. 
The 3D part painting is almost the same approach as painting most plastics parts. Paints that work excellently on plastics will us usually work impressively on 3D-printed parts. Before diving into the paint job, here are some few tips to keep in mind:  

Ensure that your surface is hole-free and free from dust and oil as well 
Shake your spray paints for even dispersion 
Ensure that your can caps are firm and leak-free
Ensure your paint area is well-lit and ventilated 
Go for more light coats than fewer heavy coats 

Selecting the right primer 
Before you start spray painting, ensure that you pick a good primer. 
Make sure your choice selection works on plastic and 3D parts, and apply the primer as directed for use on the can or label. 

Set up your part 
3D printing and additive manufacturing is great for a number of reasons. One of such reasons is the ability to conjure parts with complex geometries. To effectively paint your part, it is advisable to place your part on a part or wire-hang it to ensure that you can reach every angle. 
You should also try to do the spray painting in a generous area, well ventilated. If you don’t have such space, be sure to place a bundle of cartons around the spray area to prevent messing it up. 

Handling the paint 
Try to use a spray booth or a fume hood to prevent choking or inhaling hazardous fumes. Use a glove and a respirator too. 

Painting your part 
Apply the primer in thin light coats across your part
Determine the multiple colours to be used and gather them.
Plan out your masks and the order of painting  
Apply the base colour as the starting point 
Shield the areas you do not want painted using large cuts of painter’s tape 
Apply the next paint colour 
Allow your paint to fully dry and remove the masks 

There you have it! Follow these tips and you’ll be on your way to finishing and delivering visual excellence on your home-made 3D parts. Need much more than this? First Part provides quality 3D printing solutions that range from material selection to product printing, finishing, painting and treatment. Contact us now or click here to get a free quote on your project! 
 

Request A Quote

Upload Your FilesThe maximum supported file size for picture is 5MB, for other files is 20MB.For 3D model files, such as: STL (.stl), STEP (.stp), IGES (.igs), please compress into one ZIP or RAR file before uploading. It will take several minutes to upload your files, thank you for your patience.

Select an attch file